Digi-tv.ee

Tere,

Sooviks Kati omanike kommentaare. Tõmmata saab umpist näiteks umpist, kindlasti ka mujalt
h**p://www.ump2002.net/showrecent.php?

Tervitades,
hex

hexman kirjutas:Tere,

Sooviks Kati omanike kommentaare. Tõmmata saab umpist näiteks umpist, kindlasti ka mujalt
h**p://www.ump2002.net/showrecent.php?

Tervitades,
hex

Panin selle just eile õhtul oma UFS 922 demoeksemplarile peale ja käima ta läks (mingil moel...)
Kui Sul on UFS 922 olemas, võib proovida, et e2 versioonist aimu saada.
Minul ei käivitunud esimese hooga DiSEqC 1.0 lüliti C ja D sisendid - kuigi flash imagega käivad need suurepäraselt. Kahtlustan, et mingi "kamm" on 922 kahe tuuneri konfis.
Eks pühade ajal uurin edasi.

Muidu nagu AAF Black Pearl e2 image ikka - UFS 910 peal on see juba suht kobe asi kasutamiseks.
Kuigi UFS 910 jaoks on ka paremaid (mitteametlikke) e2 versioone olemas.

Sain pärast AAF foorumist hea nõu saamist ka DiSEqC 1.0 tööle.
Ilmselt Beta1.1 image on natuke vigane ja tuleb installida nagu DiSeqC 1.1 protokolli.

Õpetus:
Hi,

diseq is still not working well, here the solution that works fine:
First LNB
1. use "Advance" to set-up your lnb´s
2. first select the right sat you like to use on lnb1 "Astra", go now to down diseq 1.0
3. now go again down to toneburst set "A" and diseq commands "AA"
4. push OK ... and you can test or enter again into set-up antenna"Advance"

Second LNB
1. use "Advance" to set-up your lnb2
2. first select the right sat you like to use on lnb2 "Hotbird", go now to down diseq 1.0
3. now go again down to toneburst set "B" and diseq commands "AB"
4. push OK ... and you can test or enter again into set-up antenna"Advance"

Third LNB
1. use "Advance" to set-up your lnb3
2. first select the right sat you like to use on lnb2 "Astra 28,2", go now to down diseq 1.0
3. now go again down to toneburst set "A" and diseq commands "BA"
4. push OK ... and you can test or enter again into set-up antenna"Advance"

Fourth LNB
1. use "Advance" to set-up your lnb4
2. first select the right sat you like to use on lnb4 "Sirius 4", go now to down diseq 1.0
3. now go again down to toneburst set "B" and diseq commands "BB"
4. push OK ... and you can test or enter again into set-up antenna"Advance"