TVHEADEND ja LINUXi w_scan ei leia Eesti vabakanaleid?
Postitatud: 09:51, 02 Aug 2016
Proovisin selle juhendi järgi
https://www.youtube.com/watch?v=eFrR-tvB0fk
Debiani repos puudub pakett tvheadned, selle saab:
URI: http://apt.tvheadend.org/stable/
Distribution: jessie
Section(s): main
wget http://apt.tvheadend.org/stable/repo.gpg.key -O - | sudo apt-key add -
Koos tvheadnedn paketiga paigaldatakse mitmesuguseid pakette kokku 58.9 MB mahus.
Tulemused:
1. Katse
w_scan -ft -c EE
--> ei leia TV-kaarti sest see on tvheadned poolt kasutuses.
Aitas admini käsuviibalt: sudo service tvheadend stop
2. Katse
w_scan -ft -c EE
Järeldus: Tuvastab signaali MUXil aga ei saa andmevoogu (no data) ega leia kanaleid. Sama tulemuseni on jõutud ka teises foorumis
https://forum.synology.com/enu/viewtopic.php?t=116633
"Scan not working at all in France."
Mis on valesti Eesti kanalite otsingul? Kas kellelgi on pakkuda Eesti jaoks sobivaid seadistusi w_scani (Country identifier EE not defined. Using defaults.) või tvheadend jaoks?
https://www.youtube.com/watch?v=eFrR-tvB0fk
Debiani repos puudub pakett tvheadned, selle saab:
URI: http://apt.tvheadend.org/stable/
Distribution: jessie
Section(s): main
wget http://apt.tvheadend.org/stable/repo.gpg.key -O - | sudo apt-key add -
Kood: Vali kõik
--2016-08-02 09:25:17-- http://apt.tvheadend.org/stable/repo.gpg.key
Resolving apt.tvheadend.org (apt.tvheadend.org)... 83.137.145.55, 2a01:1b0:7999:402::55
Connecting to apt.tvheadend.org (apt.tvheadend.org)|83.137.145.55|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1744 (1.7K) [application/octet-stream]
Saving to: ‘STDOUT’
- 100%[=====================>] 1.70K --.-KB/s in 0s
2016-08-02 09:25:17 (95.9 MB/s) - written to stdout [1744/1744]
OKKood: Vali kõik
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libclass-methodmaker-perl libcommon-sense-perl libconvert-binhex-perl
libcrypt-ssleay-perl libdata-dump-perl libdate-manip-perl
libdigest-hmac-perl libemail-address-perl libemail-find-perl
libemail-valid-perl libexporter-lite-perl libfile-slurp-perl
libhtml-fromtext-perl libhtml-tableextract-perl
libhttp-cache-transparent-perl libhttp-server-simple-perl
libio-sessiondata-perl libio-socket-inet6-perl libio-stringy-perl
libjson-perl libjson-xs-perl liblingua-preferred-perl
liblog-tracemessages-perl libmime-tools-perl libnet-dns-perl
libnet-domain-tld-perl libnet-ip-perl libossp-uuid-perl libossp-uuid16
libsoap-lite-perl libsocket6-perl libterm-progressbar-perl libtext-bidi-perl
liburiparser1 libwww-mechanize-perl libxml-dom-perl libxml-libxslt-perl
libxml-perl libxml-regexp-perl libxml-writer-perl libxmlrpc-lite-perl
libxmltv-perl xmltv-util
Suggested packages:
libhtml-element-extended-perl uuid libapache2-mod-perl2 libmime-lite-perl
libnet-jabber-perl xmltv-gui libtext-kakasi-perl liblinux-dvb-perl
The following NEW packages will be installed:
libclass-methodmaker-perl libcommon-sense-perl libconvert-binhex-perl
libcrypt-ssleay-perl libdata-dump-perl libdate-manip-perl
libdigest-hmac-perl libemail-address-perl libemail-find-perl
libemail-valid-perl libexporter-lite-perl libfile-slurp-perl
libhtml-fromtext-perl libhtml-tableextract-perl
libhttp-cache-transparent-perl libhttp-server-simple-perl
libio-sessiondata-perl libio-socket-inet6-perl libio-stringy-perl
libjson-perl libjson-xs-perl liblingua-preferred-perl
liblog-tracemessages-perl libmime-tools-perl libnet-dns-perl
libnet-domain-tld-perl libnet-ip-perl libossp-uuid-perl libossp-uuid16
libsoap-lite-perl libsocket6-perl libterm-progressbar-perl libtext-bidi-perl
liburiparser1 libwww-mechanize-perl libxml-dom-perl libxml-libxslt-perl
libxml-perl libxml-regexp-perl libxml-writer-perl libxmlrpc-lite-perl
libxmltv-perl tvheadend xmltv-util
0 upgraded, 44 newly installed, 0 to remove and 0 not upgraded.
Need to get 8,505 kB of archives.
After this operation, 58.9 MB of additional disk space will be used.
Do you want to continue? [Y/n]
1. Katse
w_scan -ft -c EE
Kood: Vali kõik
w_scan version 20130331 (compiled for DVB API 5.9)
using settings for ESTONIA
Country identifier EE not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:3228: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
Aitas admini käsuviibalt: sudo service tvheadend stop
2. Katse
w_scan -ft -c EE
Kood: Vali kõik
w_scan version 20130331 (compiled for DVB API 5.9)
using settings for ESTONIA
Country identifier EE not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "DiBcom 7000PC": good :-)
/dev/dvb/adapter1/frontend0 -> TERRESTRIAL "DiBcom 7000PC": good :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'DiBcom 7000PC' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:01)
...
Scanning 8MHz frequencies...
474000: (time: 00:25)
...
530000: (time: 00:46) (time: 00:49) signal ok:
QAM_AUTO f = 530000 kHz I999B8C999D999T999G999Y999
Info: no data from NIT(actual)
538000: (time: 01:04)
...
858000: (time: 03:08)
tune to: QAM_AUTO f = 530000 kHz I999B8C999D999T999G999Y999
(time: 03:11) ----------no signal----------
tune to: QAM_AUTO f = 530000 kHz I999B8C999D999T999G999Y999 (no signal)
(time: 03:12) Info: no data from PAT
Info: no data from SDT(actual)
Info: no data from NIT(actual)
dumping lists (0 services)
Done.https://forum.synology.com/enu/viewtopic.php?t=116633
"Scan not working at all in France."
Mis on valesti Eesti kanalite otsingul? Kas kellelgi on pakkuda Eesti jaoks sobivaid seadistusi w_scani (Country identifier EE not defined. Using defaults.) või tvheadend jaoks?