MV 3.5.3
MV 3.5.3
On kellegil MV 3.5.3 nimelist EPG pluginat ka õnnestunud ka nii confida, et peale Premiere ka mõnel muul kanalil paketil EPG üle 3-4 h ette näitaks? Või on see endiselt vana teema ja võitlus tuuleveskitega ja tuleb jäädagi provaiderite peale näpuga näitama?
Mplug on proge, mis tõmbab epg netist. Uuri siit, kui viitsid.
http://www.digsat.net/wbb2/thread.php?threadid=25829
Käsitsi tuleb see peale panna ja seaditamine on küllalt tüütu. Peterpanil on see kohe kaasas ja ka seadistamine lihtsam. Ise olen sealt vajalikud failid Geminisse kopeerinud.
http://www.digsat.net/wbb2/thread.php?threadid=25829
Käsitsi tuleb see peale panna ja seaditamine on küllalt tüütu. Peterpanil on see kohe kaasas ja ka seadistamine lihtsam. Ise olen sealt vajalikud failid Geminisse kopeerinud.
http://forum.dreambox8000.com/showthrea ... 0#post4770Radionov kirjutas:Äkki saaks keegi lingi tarballile panna?
Ikka sama
Tänud, aga jään siiski enda juurde. Mplug ja MV on üks ja sama plugin. Ja istub mul driimis ilusti sees. Olen input configist erinevaid variante katsetanud (välja arvatud XML) ja tulemus on sama - EPG näitab 2 - 3 järgnevat saadet ja kõik... Välja arvatud Premiere, mis töötab laitmatult mitu päeva ette....
Mplug
Install MV if you haven’t already done so.
Start the MV plugin and press the dream/menu button.
Choose “input config”.
Look at the “storage dir” option and memorize the setting (we need it later).
1. Copy - Mplug - to /var/bin on your DB.
2. Change rights on the file to 755 (With telnet you type this command: chmod 755 /var/bin/Mplug).
3. the chanXXX.in files contains all the channels you can grab from. Remove the ones you don’t need EPG from (remove the entire line, also the number in front, if there is one).
4. You set number of days to grab in the chanXXX.in files along with language for Dtv. (max number of days to grab for the sources are: Dtv=14,Bleb=7,Dag=7,Dr=7. Max for Eu is 9, but because of the way this site is built it may be only 1 day).
5. If you want Film-tagging (so MV will tag films as film) change FILM=NO to FILM=YES in chanDtv.in, ChanDag.in and ChanDr.in.
6. Copy – chanDtv.in,chanEu.in,chanDag.in,chanDr.in and chanBle.in – to /var/tuxbox/config/mv
7. Make a subfolder mplug in the “storage dir” folder (I told you, you needed it later). If you have it on an usb stick it should be /mnt/usb/mv/mplug.
The syntax for the telnet command you use to grab EPG with Mplug is:
/var/bin/Mplug Where-to-put-grabbed-file filename The_location_of_chan_files
For the example above, and grabbing 7 days of EPG, this is:
/var/bin/Mplug /mnt/usb/mv/mplug 1 /var/tuxbox/config/mv (you then also need to set DAYS=7 in all the chanXXX.in files).
Filname is either 1 or 0, 1 for mplug.xmltv.cfe and 0 for mplug.dat.
The inputs.txt file should reflect this setting.
The inputs.txt file supplied with this package expects 1.
Install MV if you haven’t already done so.
Start the MV plugin and press the dream/menu button.
Choose “input config”.
Look at the “storage dir” option and memorize the setting (we need it later).
1. Copy - Mplug - to /var/bin on your DB.
2. Change rights on the file to 755 (With telnet you type this command: chmod 755 /var/bin/Mplug).
3. the chanXXX.in files contains all the channels you can grab from. Remove the ones you don’t need EPG from (remove the entire line, also the number in front, if there is one).
4. You set number of days to grab in the chanXXX.in files along with language for Dtv. (max number of days to grab for the sources are: Dtv=14,Bleb=7,Dag=7,Dr=7. Max for Eu is 9, but because of the way this site is built it may be only 1 day).
5. If you want Film-tagging (so MV will tag films as film) change FILM=NO to FILM=YES in chanDtv.in, ChanDag.in and ChanDr.in.
6. Copy – chanDtv.in,chanEu.in,chanDag.in,chanDr.in and chanBle.in – to /var/tuxbox/config/mv
7. Make a subfolder mplug in the “storage dir” folder (I told you, you needed it later). If you have it on an usb stick it should be /mnt/usb/mv/mplug.
The syntax for the telnet command you use to grab EPG with Mplug is:
/var/bin/Mplug Where-to-put-grabbed-file filename The_location_of_chan_files
For the example above, and grabbing 7 days of EPG, this is:
/var/bin/Mplug /mnt/usb/mv/mplug 1 /var/tuxbox/config/mv (you then also need to set DAYS=7 in all the chanXXX.in files).
Filname is either 1 or 0, 1 for mplug.xmltv.cfe and 0 for mplug.dat.
The inputs.txt file should reflect this setting.
The inputs.txt file supplied with this package expects 1.
MV
Mnjahh,
Sai kõik tehtud nii nagu õpetet, tulemus paraku sama. Päärn, kui mul storage dir folder istub HDD peal (hdd/mv), mis oleks siis viimane sisestatav syntax?
Näites on see:
/var/bin/Mplug /mnt/usb/mv/mplug 1 /var/tuxbox/config/mv
Tänud ette!
Sai kõik tehtud nii nagu õpetet, tulemus paraku sama. Päärn, kui mul storage dir folder istub HDD peal (hdd/mv), mis oleks siis viimane sisestatav syntax?
Näites on see:
/var/bin/Mplug /mnt/usb/mv/mplug 1 /var/tuxbox/config/mv
Tänud ette!
ahjaa
Ahjaa,
mv.log failis on selline info:
Error: failed download from http://mv.nordicteam.com//tv-20070513.dat, response code: 0
Error: failed download from http://mv.dinglisch.net/data/e/tv-20070513.dat, response code: 404
mv.log failis on selline info:
Error: failed download from http://mv.nordicteam.com//tv-20070513.dat, response code: 0
Error: failed download from http://mv.dinglisch.net/data/e/tv-20070513.dat, response code: 404
Tõmba igaks juhuks viimane mplug.
http://digsat.net/database/beta/Software/Mplug.rar
Seal readme seletab põhjalikult. Kui on HDD peal, võiks olla
/var/bin/Mplug /mnt/hdd/mv/mplug 1 /var/tuxbox/config/mv
Kas sul inputs on ikka õieti?
MV
1. Copy the supplied inputs.txt file to /var/tuxbox/config/mv
2. Open MV, press dream/menu, go into input config
You have 4 different Mplug sources to choose from:
2a. Mplug -> older MV versions with xmltv.cfe
2b. Mplug_dat -> older MV versions with Epgui/dat
2c. Mplug_MV350 -> MV 3.50 and newer with xmltv.cfe
2d. Mplug_MV350_dat - > MV 3.50 and newer with Epgui/dat
Choose one of them, according to your environment.
3. You will also have to map the new grabbed channels in the Alias Manager.
Mplug_MV350 tuleks valida.
Tegelikult on veel parem asi olemas - fetchEPG, aga see töötab ainult PLI-ga
http://rapidshare.com/files/26673600/fe ... ta1.01.zip
Sellega saaks põhimõtteliselt ka Eesti kanalid, kui leiduks leht, mis töötab.
http://digsat.net/database/beta/Software/Mplug.rar
Seal readme seletab põhjalikult. Kui on HDD peal, võiks olla
/var/bin/Mplug /mnt/hdd/mv/mplug 1 /var/tuxbox/config/mv
Kas sul inputs on ikka õieti?
MV
1. Copy the supplied inputs.txt file to /var/tuxbox/config/mv
2. Open MV, press dream/menu, go into input config
You have 4 different Mplug sources to choose from:
2a. Mplug -> older MV versions with xmltv.cfe
2b. Mplug_dat -> older MV versions with Epgui/dat
2c. Mplug_MV350 -> MV 3.50 and newer with xmltv.cfe
2d. Mplug_MV350_dat - > MV 3.50 and newer with Epgui/dat
Choose one of them, according to your environment.
3. You will also have to map the new grabbed channels in the Alias Manager.
Mplug_MV350 tuleks valida.
Tegelikult on veel parem asi olemas - fetchEPG, aga see töötab ainult PLI-ga
http://rapidshare.com/files/26673600/fe ... ta1.01.zip
Sellega saaks põhimõtteliselt ka Eesti kanalid, kui leiduks leht, mis töötab.